2022 Jeep Gladiator Air Filter in Danvers, MA

Engine air filter: ${{vehicle.real_engine_filter_price_range_usd}}; cabin air filter: ${{vehicle.real_cabin_filter_price_range_usd}} at Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers.

Pricing is up-front and reflects OEM-spec parts for the 3.6L V6 and the cabin HVAC. Your visit includes a quick fitment check and proper disposal. New England dust, road sand, and pollen can accelerate filter loading, so timely replacement protects performance and air quality. Check our service specials before you schedule service.

• Includes Mopar-spec filter matched to the 3.6L Pentastar V6
• Intake box seal check and MAF/air duct visual inspection
• Old filter disposal and fitment verification

Replace the engine air filter about every {{vehicle.oem_engine_filter_interval_miles}} miles under normal conditions.

Frequent gravel-road driving, plowing, coastal salt spray, or heavy pollen around Danvers and the North Shore may justify earlier service. A clean filter helps the 3.6L V6 maintain power and fuel economy year-round. We can inspect yours during any visit and advise based on actual dust loading. Book a quick check with our factory-certified team.

• Follow {{vehicle.oem_engine_filter_interval_miles}}-mile baseline; adjust for local conditions
• Visual inspection during routine service in Danvers, MA
• OEM-spec fit ensures proper seal and airbox integrity

Replace the cabin air filter about every {{vehicle.oem_cabin_filter_interval_miles}} miles to maintain HVAC airflow and in-cabin air quality.

Spring pollen and winter sand along Route 114 can load the Gladiator’s cabin filter faster than average. If you notice a musty smell or weak airflow, service may be due sooner. We install OEM-quality filters sized for the Gladiator’s HVAC and confirm quiet, consistent blower performance after replacement.

• Baseline: {{vehicle.oem_cabin_filter_interval_miles}} miles; shorten in heavy pollen/dust seasons
• Improves HVAC airflow and defrost performance
• Designed to fit the Gladiator’s HVAC housing without gaps

It’s in the under-hood airbox, typically on the passenger side, secured by clips or screws.

Open the hood and locate the rectangular airbox connected to the intake snorkel. Release the fasteners, lift the lid, and the 3.6L V6 filter element sits inside. The cabin air filter, by contrast, is typically accessed behind the glove box. If you prefer, we can inspect and replace both during a same-day appointment in Danvers.

• Passenger-side airbox next to the intake duct
• Tool-free clips on most trims; some use screws
• Check lid gasket for proper seal after reassembly

The engine air filter cleans air for combustion, while the cabin air filter cleans air entering the HVAC for passengers.

The 3.6L V6 relies on a clean engine filter to protect the MAF and throttle body and support power and MPG. The cabin filter captures dust, pollen, and debris so the interior stays comfortable and HVAC airflow stays strong. We stock OEM-spec filters for both systems and install them to factory standards.

• Engine filter: protects intake/MAF; located in the under-hood airbox
• Cabin filter: improves in-cabin air; accessed behind the glove box
• Both are sized to Gladiator housings for proper sealing

Five common signs: reduced power, lower fuel economy, rough idle, weak HVAC airflow, and musty interior odor.

Engine symptoms point to a loaded intake filter on the 3.6L V6; interior symptoms suggest a saturated cabin filter. New England’s sand and pollen can speed up clogging, especially after winter. If you notice any of these, schedule a quick inspection in Danvers so we can confirm and replace as needed.

• Engine: sluggish acceleration and lower MPG
• HVAC: reduced airflow or lingering odors
• Visible debris or darkened filter media

Yes —the engine filter is DIY-friendly; the cabin filter is moderate and easier with dealer access and trim know-how.

Many owners can open the airbox and swap the 3.6L V6 filter at home. The cabin filter typically requires glove box access and careful reassembly to avoid rattles or airflow leaks. Our team installs Mopar-spec filters, inspects the intake/MAF, and verifies HVAC performance—then documents service for your records.

• DIY engine filter: basic tools and correct orientation
• Cabin filter: glove box access; mind latch/damper alignment
• Dealer: OEM filter, intake/MAF visual, and fitment verification

Yes—our Service Center installs genuine Mopar and OEM-spec filters for the 2022 Jeep Gladiator.

OEM-spec elements match the Gladiators airbox and HVAC housings for the best seal and filtration. That accuracy helps protect the MAF, throttle body, and blower motor, especially in New Englands dusty and salty conditions. Ask us to show you the part before installation for complete confidence.

• Mopar-spec media and frame dimensions for proper sealing
• Optimized airflow for the 3.6L V6 and HVAC system
• Installed by factory-certified, OEM-trained technicians

For the 2022 Jeep Gladiator, our process is structured, quick, and transparent. We start by confirming fitment and inspecting the engine airbox seals and ducts for cracks or loose clamps that could admit unfiltered air. Next, we remove and assess the engine air filter; if replacement is due, we install a Mopar-spec element and re-seat the lid evenly. We then access the cabin filter housing behind the glove box, check for debris, and install a fresh cabin element when required. A visual MAF and intake snorkel inspection helps protect drivability and fuel economy. We finish with a post-service airflow check and note the service on your records. Ready to go? Review our service specials and schedule service online.

The 2022 Jeep Gladiator’s 3.6L V6 benefits from an OEM-spec engine air filter sized to the under-hood airbox, ensuring a tight perimeter seal and correct pleat density for balanced flow and filtration. The cabin air filter fits the HVAC housing behind the glove box and captures dust, pollen, and road debris common across the North Shore. Follow OEM-recommended intervals—engine roughly every {{vehicle.oem_engine_filter_interval_miles}} miles and cabin roughly every {{vehicle.oem_cabin_filter_interval_miles}} miles—then shorten in dusty, sandy, or high-pollen conditions. We install genuine Mopar and OEM-quality filters and verify housing integrity after service. Bring your 2022 Jeep Gladiator to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for OEM-spec filter service — schedule service.

Our Danvers location at 107 Andover St (Route 114) makes it easy for drivers from Peabody, Beverly, Lynnfield, Andover, and Salem to maintain clean engine and cabin air on the 2022 Jeep Gladiator. New England winters bring sand and salt; spring ushers in heavy pollen—both can load filters faster than average. Our factory-certified, OEM-trained technicians inspect, replace, and verify proper sealing so your V6 and HVAC breathe clean. With {{rooftop.years_in_operation}} years serving the area and {{rooftop.certified_tech_count}} certified technicians, we prioritize accuracy and clear communication. Browse current service specials and schedule your appointment. For directions, plug “107 Andover St, Danvers, MA 01923” into your maps app and look for our modern showroom and Service Center on Route 114.