2022 Dodge Charger Air Filter in Danvers, MA

The 2022 Dodge Charger’s engine air filter sits inside the intake airbox in the engine bay, typically on the passenger side, ahead of the engine.

This location lets the 6.4L V8 (485 hp/475 lb-ft) draw clean air before it reaches the mass airflow pathway. Our Danvers team can open the housing, check the seal, and confirm there’s no debris or moisture. Proper fitment helps maintain throttle response and stable idle.

• Access via intake airbox cover; secured with clips or screws
• Inspect filter pleats and housing gasket for tears or gaps
• Verify no leaves/sand in snorkel or box after New England driving

The 2022 Dodge Charger’s cabin air filter is typically located behind the glove box, within the HVAC intake housing.

This filter screens pollen and road dust before air reaches the vents. Access often requires lowering the glove box and removing a small access panel. Our technicians in Danvers can replace it cleanly and confirm the door and seals are reinstalled correctly to prevent bypass.

• Remove glove box damper/stops to drop the compartment
• Open the cabin filter door; note airflow arrow orientation
• Seat the new filter evenly to avoid HVAC whistle or leaks

The engine air filter protects the 6.4L V8s intake for combustion, while the cabin air filter cleans air for passengers through the HVAC system.

Each filter serves a distinct system: the engine filter supports performance and efficiency, and the cabin filter supports health and comfort. Using Mopar-spec media ensures proper flow and filtration. Our Danvers service team inspects both systems during scheduled maintenance.

• Engine filter: prevents dust ingestion and MAF contamination
• Cabin filter: reduces pollen, dust, and odors inside the car
• Different locations, sizes, and airflow requirements

Common signs include reduced power, rough or unstable idle, lower fuel economy, weak HVAC airflow, and musty cabin odors.

On the 2022 Dodge Chargers 6.4L V8, restricted intake flow can blunt throttle response and raise fuel trims. A saturated cabin filter limits defrost performance and recirculation effectiveness. If you notice these symptoms around Danvers, book a quick check and replacement.

• Engine: slower acceleration, audible intake strain
• Cabin: diminished fan output at higher speeds
• Visual: dark, debris-laden pleats or damp odor

Yes, the engine filter is typically DIY-friendly, while the cabin filter often needs glove box removal and benefits from professional fitment.

Many owners can open the engine airbox and swap the filter, but the cabin filters access and sealing are easier with the right tools. At Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers, we add intake/MAF checks and confirm Mopar-spec fit and airflow.

• DIY: engine filter swap with basic hand tools
• Dealer: cabin filter access, seal inspection, rattle prevention
• Technician check: intake leaks, debris, and MAF cleanliness

Yes—our Danvers service center installs genuine Mopar air filters that meet Dodge OEM specifications.

OEM-quality media and proper pleat density help the 6.4L V8 maintain calibrated airflow. We source parts through Mopar channels and verify fitment in the airbox and HVAC housing. This approach supports performance consistency and reduces intake sensor contamination risk.

• Genuine Mopar filters for engine and cabin applications
• Fitment check to prevent bypass and sealing issues
• Documentation on your service record for future reference

Yes—premium unleaded (required) is specified, and a clogged engine air filter can noticeably dull the 6.4L V8s throttle response.

The Chargers high-output V8 is calibrated for premium fuel and clean intake airflow. Restriction ahead of the mass airflow path can push trims and reduce power feel. If your driving around the North Shore feels sluggish, its time to inspect the filter and intake tract.

• Use premium unleaded (required) per factory spec
• Replace engine filter when contamination builds
• Check for debris in snorkel after storms or leaf fall

Schedule online at our Danvers service page: schedule service, or visit 107 Andover St (Route 114), Danvers, MA 01923.

Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers services Dodge vehicles across the North Shore and Greater Boston. Booking ahead secures parts and time for both engine and cabin filter checks. See current offers before you come in.

• Online booking: schedule service
• Check deals: service specials
• Easy access on Route 114 in Danvers

Yes—current offers are posted on our service specials page for Danvers, MA customers.

Before you book your Chargers engine or cabin filter service, review our rotating Mopar offers online. Specials change periodically and may include maintenance bundles that align with your visit. Combine with online scheduling for a streamlined appointment.

• View live specials: service specials
• Bundle filter service with other maintenance when available
• Book ahead to align parts and time: schedule service

The 2022 Dodge Charger pairs a 6.4L naturally aspirated V8 (engine code 8VNAG6.4) with an intake airbox that houses the engine air filter, while the cabin air filter resides behind the glove box within the HVAC intake. Genuine Mopar filters are engineered for the Chargers airflow targets and sealing surfaces to help preserve 485 hp at 6,100 rpm and 475 lb-ft at 4,100 rpm. Always follow the factory maintenance schedule in your owners manual and adjust based on driving environment. If you notice musty cabin odors or diminished throttle response, have both filters inspected for debris, moisture, or deformation. Bring your 2022 Dodge Charger to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for OEM-spec filter service — schedule service.

Our air filter service for the 2022 Dodge Charger focuses on accuracy and repeatable results. We begin with a visual inspection of the intake tract and airbox, followed by removal and evaluation of the engine air filter. If replacement is due, we install a Mopar-spec filter, confirm gasket seating, and check for debris in the snorkel. For the cabin, we access the HVAC housing behind the glove box, remove the filter, clean the cavity, and install a new filter with correct airflow orientation. A visual MAF sensor check and housing fastener verification are included. See current service specials and schedule service online.

We support 2022 Dodge Charger owners across the North Shore and Greater Boston— including Peabody, Beverly, Lynnfield, Andover, and Salem— from our modern facility at 107 Andover St (Route 114), Danvers, MA 01923. Regional driving can introduce sand, leaf matter, and road debris into the intake and cowl areas, so periodic inspections help prevent restricted airflow and sensor fouling. Our OEM-trained technicians install genuine Mopar filters and verify sealing to avoid bypass that can reduce performance or cabin comfort. Book ahead to coordinate parts and minimize your visit time. For directions, specials, and an appointment, see service specials and schedule service.