2020 Jeep Grand Cherokee Coolant in Danvers, MA

These signs can point to depleted coolant protection or a leak in the cooling system. Do not open the system while it is hot or pressurized; checking it should be done cold. A service visit can identify the condition and determine whether repair is needed.

• Temperature gauge running higher than usual
• Sweet smell or a puddle beneath the front of the vehicle
• Rusty, cloudy or low coolant in the reservoir

The refill uses the type and concentration the manufacturer specifies for this vehicle. Pressure testing helps distinguish a fluid service from a leak that needs repair. The inspection is performed with the system cold because coolant can remain hot and pressurized after driving.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator and water pump area

The schedule is the appropriate authority for planned coolant replacement on this vehicle. Coolant condition can also be tested during a service visit between scheduled points, especially when the level changes or the vehicle shows cooling-system symptoms. A test helps separate routine service from a leak or another condition requiring inspection.

• Follow the manufacturer's maintenance schedule
• Have coolant condition assessed between scheduled points
• Book an inspection if the level drops or temperature rises

Coolants are not interchangeable, so selecting fluid by appearance alone is not appropriate. Colour is not a reliable guide to what is in the bottle or whether it is suitable for this vehicle. A service visit uses the manufacturer's direction and considers the condition of the cooling system before recommending the next step.

• Use the coolant type specified by the manufacturer
• Do not assume different coolants can be mixed
• Do not use colour alone to identify coolant

A level that keeps dropping indicates a leak rather than normal consumption and calls for an inspection. The cooling system should be checked cold because it is hot and pressurized after operation. A pressure test can help locate a leak, while coolant condition testing helps determine whether service is also due.

• Adding coolant only restores the fluid level
• A repeatedly low level may indicate a leak
• Have the system inspected and pressure tested cold

Booking the service gives the technician an opportunity to assess coolant condition, pressure test the system and inspect the related components. The visit can clarify whether the vehicle needs a coolant service, a leak repair or both. The dealership is located at 107 Andover St Route 114.

• Schedule service online
• Call 978-850-6937
• Review service specials before booking