2020 Chrysler 300 Air Filter in Danvers, MA

Engine and cabin air filter pricing for the 2020 Chrysler 300 is posted separately on our Danvers service menu.

Costs vary by filter type (engine vs. cabin) and parts selection, and we provide up-front estimates before work begins. Your 3.6L V6 uses a dedicated engine intake filter, while the cabin filter supports the HVAC system. We list each service clearly so you can approve with confidence and apply any available service specials. For the most accurate quote, please schedule service and we’ll confirm your vehicle details.

• Transparent, line-item pricing shown before any work
• Engine and cabin filters quoted separately
• Online scheduling and special offers available

Chrysler lists the official engine air filter interval for the 2020 Chrysler 300 in the owner’s manual maintenance schedule.

Driving conditions around the North Shore—winter road sand, coastal salt, and spring pollen—can load the filter sooner than in mild climates. Inspecting at oil-change visits helps time replacement to your usage. If you experience reduced acceleration or lower fuel economy with the 3.6L V6, check the filter sooner. Not sure of your interval? Schedule service and we’ll measure restriction and advise.

• Follow the 2020 Chrysler 300 owner’s manual interval
• Inspect more often in dusty, sandy, or high-pollen seasons
• Watch for power loss or mpg drop as early indicators

The 2020 Chrysler 300 cabin air filter interval is specified in the owner’s manual under HVAC service.

Pollen-heavy springs and leaf debris in New England can shorten practical cabin filter life, especially if you park outdoors. If airflow weakens or you notice musty odors, plan an earlier replacement. We can check your filter condition during any visit and align timing to your commute and allergy needs—book a quick check via our schedule service tool.

• Use the manual’s HVAC service interval as a baseline
• Replace sooner for allergies, odors, or weak airflow
• Outdoor parking and tree debris accelerate loading

The 2020 Chrysler 300 engine air filter sits in a sealed airbox in the engine bay; the cabin air filter is typically behind the glove box.

The airbox feeds the 3.6L V6 intake and is secured with clips or screws for tool-light access. The cabin filter slides into an HVAC slot accessed by lowering or removing the glove box trim. If you prefer DIY, be careful with clips and seals; otherwise, our team in Danvers can service both during one visit.

• Engine filter: engine-bay airbox ahead of the intake tube
• Cabin filter: behind glove box near HVAC blower
• Seals must be seated to avoid unfiltered air bypass

The engine filter cleans air for combustion; the cabin filter cleans air for the HVAC system and passengers.

On the 2020 Chrysler 300, the engine filter protects the 3.6L V6 and its sensors from dust that can affect performance and fuel economy. The cabin filter captures pollen, dust, and small particles before they enter the interior. Both have different media and fitment, so they are not interchangeable.

• Engine filter: protects intake, MAF, and throttle body
• Cabin filter: improves in-cabin air quality and airflow
• Distinct part numbers and service intervals

Common signs include reduced power and mpg (engine filter) and weak HVAC airflow or musty odors (cabin filter).

If your 3.6L V6 feels sluggish or idles roughly, the engine filter may be restricting intake air. Inside the cabin, decreased blower output, haze on glass, or persistent smells suggest a loaded cabin filter. We can confirm with a visual inspection and restriction check—book a quick visit in Danvers.

• Engine: hesitation, rough idle, lower fuel economy
• Cabin: weak vents, odors, dust on dash/windshield
• Seasonal pollen and road grit accelerate clogging

The engine filter is generally DIY-friendly; the cabin filter can require glove box trim removal that many owners prefer we handle.

DIY is possible if you’re comfortable reseating the airbox seal and clips to prevent unmetered air. In Danvers, our technicians also check the intake housing and perform a visual MAF/throttle inspection while installing an OEM-spec filter. If you prefer convenience and a quick quality check, schedule service online.

• DIY engine filter: simple tools and careful resealing
• Cabin filter: interior trim access and correct airflow arrow
• Dealer service adds intake and sensor checks

Yes—our service department installs OEM-spec Mopar filters on the 2020 Chrysler 300.

Using Mopar components helps ensure proper fit, filtration efficiency, and sealing on the 3.6L V6 and the HVAC housing. We also dispose of used filters responsibly and verify airflow direction and housing integrity. If you’d like to pair your visit with other maintenance, check our current service specials and schedule an appointment.

• Mopar-engineered fit and filtration for Chrysler applications
• Correct seal seating and airflow orientation verified
• Used filter disposal included

The 2020 Chrysler 300 uses an engine intake air filter for its 3.6L V6 and a separate cabin microfilter for the HVAC system. Mopar is the OEM brand for Chrysler applications, offering correct fitment and sealing to protect the mass airflow path and ensure interior air quality. Follow the owner’s manual for official replacement intervals; local conditions like spring pollen, winter sand, and salt can shorten practical service life. If acceleration feels muted or HVAC airflow drops, an inspection is due. We verify airbox seals, check for debris, and confirm airflow direction on cabin elements. Bring your 2020 Chrysler 300 to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for OEM-spec filter service — schedule service.

Our process for the 2020 Chrysler 300 covers both performance and comfort. We begin with a visual check of the engine intake tract, then remove and inspect the engine air filter for debris or damage and replace it as needed with an OEM-spec component. Next, we access the cabin filter behind the glove box, inspect its condition, and replace it if restricted, verifying airflow orientation. We conclude with an intake housing seal check and a visual look at the MAF/throttle area. Ready to proceed? Review current service specials and schedule service online.

We serve drivers across the North Shore and Greater Boston—Peabody, Beverly, Lynnfield, Andover, and Salem—right here at 107 Andover St (Route 114), Danvers, MA 01923. Regional factors like coastal humidity, tree pollen, and winter road sand can load filters faster; if your commute includes construction zones or salted roads, more frequent inspections help maintain performance and clear cabin air. The 2020 Chrysler 300 responds noticeably to a clean engine filter with smoother throttle and stable idle, while a fresh cabin filter restores HVAC airflow and reduces odors. Use our online tool to schedule service and arrive via Route 114 for quick check-in.