2019 Ram Promaster Cargo Van Air Filter in Danvers, MA

The 2019 Ram Promaster Cargo Van’s engine air filter sits in a rectangular airbox inside the engine bay, typically on the driver’s side.

This airbox feeds the 3.6L Pentastar V6 (280 hp/260 lb-ft) fresh intake air. Pop the hood, locate the boxed housing with clips or screws, and you’ll find the panel-style filter inside. If you prefer not to DIY, our Danvers service team can inspect and replace it using Mopar-spec parts.

• Access: engine bay, driver’s side airbox
• Filter type: panel-style for 3.6L V6 (NA)
• Schedule a professional check: schedule service

The cabin air filter on a 2019 Ram Promaster Cargo Van is typically located behind or beneath the glove box within the HVAC intake path.

This filter screens pollen, dust, and road debris before air reaches the cabin. Access often involves lowering the glove box and removing a small cover. If you operate in Danvers or on Route 114, seasonal pollen and winter grit can load this filter faster—our team can check it during any visit.

• Common access: glove box area, small rectangular cover
• Protects HVAC evaporator and cabin air quality
• Check local service specials before you book

The engine filter protects the 3.6L V6’s intake for combustion, while the cabin filter cleans HVAC air for passengers.

Under-hood, the engine filter prevents dust from entering the throttle body and intake, supporting power and fuel economy. Inside, the cabin filter reduces pollen and odors for a cleaner workspace. Both matter for New England driving where salt, sand, and tree pollen are common.

• Engine filter: performance and engine protection
• Cabin filter: air quality and clear HVAC airflow
• OEM-spec parts available in Danvers: schedule service

Common signs include reduced power, lower fuel economy, and rough idle for the engine filter, plus weak HVAC airflow and musty odors for the cabin filter.

On the 3.6L V6, a restricted engine filter can dull throttle response and raise fuel use. In the cabin, a loaded filter strains the blower and can fog windows more easily. Danvers-area dust, construction, and coastal pollen can accelerate clogging.

• Engine: hesitation, higher RPM for the same load
• Cabin: noisy fan, uneven defrost performance
• Quick check available during oil service: schedule appointment

Yes—engine filters are usually DIY-friendly; cabin filters may require glove box removal, while dealer service includes inspections and OEM-spec parts.

Many owners swap the engine filter using basic tools. The cabin filter can involve trim clips and tight access. At Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers, we also check the intake housing and visually inspect the MAF area while installing Mopar-spec filters.

• DIY: engine filter clips/screws; watch sealing surfaces
• Dealer: intake/MAF visual, correct fitment, disposal
• See current service specials

Yes—our Danvers service center installs genuine Mopar and OEM-spec filters for Ram vehicles.

Using OEM-spec filtration maintains proper airflow and sealing for the 3.6L V6 and protects the HVAC system. This helps preserve performance and ensures correct fit with factory airboxes and housings. If your van works across the North Shore, sticking with OEM parts is a practical reliability choice.

• Mopar/OEM fitment for Ram ProMaster platforms
• Supports factory intake and HVAC performance
• Book online: schedule service

Follow the interval listed in your Ram owner’s manual for the 2019 Promaster Cargo Van, and inspect more often in dusty or high-pollen Danvers conditions.

Work vans on Route 114 or job sites can load filters faster due to sand and debris. We recommend a quick visual check at each oil change and replacement per the manual’s guidance. Our team can document condition and keep a service history for fleet use.

• Manual-based interval; inspect at every oil change
• Increase checks with construction or unpaved routes
• Easy booking: schedule appointment

Use the cabin filter interval in your Ram owner’s manual, with earlier replacement if airflow weakens or odors appear during North Shore pollen seasons.

Seasonal pollen and winter road grit in Greater Boston can shorten cabin filter life. If you notice reduced blower performance or a musty smell, schedule a check. We can measure airflow changes and confirm if replacement is due.

• Manual-driven interval; replace sooner with symptoms
• Pollen loads peak in spring; salt/sand peak in winter
• Check deals: service specials

During a 2019 Ram Promaster Cargo Van air filter service, our Mopar-trained team performs a focused intake and HVAC check so you leave with proper airflow and documented results. We begin with an engine air filter inspection, confirm sealing surfaces, then replace with an OEM-spec filter if needed. Next, we access the cabin filter behind/below the glove box, evaluate dust loading, and replace if restricted. We also inspect the intake housing for damage, verify clamps and ducting, and perform a visual MAF/throttle-body check for contamination. Service includes proper filter orientation, housing re-seal, and responsible disposal. You can review current offers on our service specials page and book online to schedule service. For quick questions or to coordinate fleet visits, call us at our Danvers service line.

Serving Danvers, Peabody, Beverly, Lynnfield, Andover, and Salem, our shop on Route 114 understands local driving that impacts filters—spring pollen, summer construction dust, and winter road salt/sand. We apply OEM procedures for the Promaster platform to preserve engine breathing and clean cabin airflow for drivers spending long hours on deliveries. If your routes include stop‑and‑go near 107 Andover St or highway stretches to Greater Boston, we can time filter checks with oil service to minimize downtime. Visit our modern facility at 107 Andover St, Danvers, MA 01923 for a quick intake evaluation or to replace both filters together. Have a question before you arrive? Use our online system to schedule an appointment or preview service specials for potential savings.

The 2019 Ram Promaster Cargo Van uses a panel-style engine air filter designed for the 3.6L V6 (engine code reference: 6VNAG3.6) and a cabin microfilter that fits the HVAC intake behind/below the glove box. Ram specifies OEM-quality media and sealing to maintain proper mass-airflow readings and blower efficiency. If you operate in dusty job sites or through heavy pollen, increase inspections to prevent power loss or HVAC restriction. We use genuine Mopar and OEM-spec filters and verify housing integrity and orientation during installation. Bring your 2019 Ram Promaster Cargo Van to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for OEM-spec filter service — schedule service.