2019 RAM 1500 Oil Change in Danvers, MA

Most 2019 Ram 1500 oil changes at dealerships take about 45–60 minutes.

Plan for a brief write-up, the oil and filter service, and a multi-point inspection. In Danvers, you can schedule service to reduce wait times and see available appointment windows. If you add services (like a tire rotation), your visit may run a bit longer. Check our service specials before you arrive.

• Express appointments and early drop-off can shorten the visit.
• Adding a rotation or cabin filter replacement extends time.
• Arrive a few minutes early for check-in and advisor review.

Under normal driving, change the 2019 Ram 1500’s oil about every 10,000 miles or 12 months; under severe New England use, target ~5,000 miles or 6 months.

Cold starts, frequent short trips, towing, dusty jobsites, and stop-and-go traffic shorten oil life. The 2019 Ram 1500’s oil life monitor is a helpful guide, but following an OEM interval helps protect warranty coverage and long-term engine health. If your use is mixed, err on the conservative side and schedule service seasonally.

• Severe duty = towing, plowing, idling, short trips, or dusty conditions.
• Use the oil life indicator as a guide, not a replacement for OEM limits.
• Save receipts and inspections to document maintenance history.

SAE 0W-20 full synthetic meeting FCA MS-6395 is the factory specification for the 2019 Ram 1500 3.6L V6.

This viscosity improves cold-start pumpability in Massachusetts winters while maintaining protection at operating temperature. Our Danvers team installs OEM-spec oil and a Mopar filter to match your engine’s requirements. If you’re unsure which formulation you need, we’ll confirm by VIN and schedule service for the correct fill.

• Use a Mopar or OEM-equivalent filter that meets Ram specifications.
• 0W-20 supports cold starts common on the North Shore.
• Always verify the oil meets FCA MS-6395 on the bottle label.

The 2019 Ram 1500 3.6L V6 holds about 5.9 quarts (5.6 liters) of oil with a new filter.

Capacity can vary by engine, so the 5.7L HEMI requires a different fill. After service, we verify the level on the dipstick and check for leaks during the multi-point inspection. For an OEM-spec fill and disposal handled for you, schedule service in Danvers.

• Confirm your engine (3.6L V6 vs. 5.7L V8) before buying oil.
• Recheck the level after the first drive cycle.
• We recycle used oil and filters per Massachusetts regulations.

Yes—dealer service installs OEM-spec oil and a Mopar filter, includes a multi-point inspection, and records maintenance for warranty support.

Quick-lube shops can be convenient, but matching FCA MS-6395 oil and the correct filter is critical. Our factory-certified technicians also check for open recalls and TSBs while your truck is in the bay. Compare what’s included and book your preferred time online.

• OEM-spec oil/filter, fluid top-offs, and inspection are included.
• Access to Ram software updates, TSBs, and recall checks.
• Easy online schedule service with up-front write-up.

Skipping required oil changes can jeopardize warranty coverage if you exceed the OEM interval or lack service records.

Follow the Ram maintenance schedule and keep invoices to show compliance. Warranty work generally requires a certified facility and proof the correct oil and filter were used. If you’re overdue, book the next visit now and keep future intervals consistent.

• Document date, mileage, oil spec, and filter on every receipt.
• Use FCA MS-6395 0W-20 (3.6L) to match the factory requirement.
• Set reminders or use the oil life monitor to stay on track.

Full synthetic offers the best oxidation resistance and cold-flow performance; blends are mid-tier; conventional provides the least protection for modern engines.

For the 2019 Ram 1500 3.6L, the factory spec is 0W-20 that meets FCA MS-6395—most qualifying oils are full synthetic. Full synthetic maintains viscosity in New England winters and under towing loads. When in doubt, check the label for MS-6395 and book an OEM-spec change.

• Verify FCA MS-6395 compliance on the oil container.
• Full synthetic 0W-20 supports cold starts and stop-and-go traffic.
• Blend/conventional products may not meet the MS-6395 requirement.

Get an exact, out-the-door price online—Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers posts up-front, line-item oil change pricing.

Costs vary by engine, oil type, and filter. Check current service specials for savings, then schedule service to lock in a time that works for you. Every visit uses OEM-spec oil and a Mopar or OEM-equivalent filter.

• Transparent estimates with no surprise shop fees.
• OEM-spec oil/filter, inspection, and fluid top-offs included.
• Ask about adding a tire rotation during the same visit.

Drivers across the North Shore rely on the 2019 Ram 1500 for work and weekends alike. We proudly serve Danvers, Peabody, Beverly, Lynnfield, Andover, and Salem with oil changes tailored to real New England use: cold starts, stop-and-go commutes, towing, and dusty job sites. Winter temperatures demand fast oil pumpability, while summer towing and highway miles stress viscosity stability. Our OEM-trained technicians install oil that meets FCA MS-6395 and the correct Mopar filter for your engine, then complete a multi-point inspection and fluid top-offs. Find us at 107 Andover St (Route 114), Danvers, MA 01923. Have a tight schedule? Use our online portal to schedule service and see appointment times, and browse service specials before you arrive.

Each oil change on the 2019 Ram 1500 follows a clear, OEM-style process. We verify your engine and oil spec, drain the used oil, replace the Mopar or OEM-equivalent filter, and refill with oil that meets FCA MS-6395 at the correct viscosity. A multi-point inspection checks belts, hoses, brakes, tires, and underbody components; we also top off fluids and set tire pressures to spec. Service documentation is provided for your records to support factory warranty compliance. Want to pair a rotation or cabin filter replacement? Add it when you schedule service. Don’t forget to review our current service specials for potential savings on your visit.

The 2019 Ram 1500 3.6L V6 is engineered for SAE 0W-20 full synthetic engine oil that meets FCA Material Standard MS-6395. Typical fill quantity is about 5.9 quarts (5.6 liters) with a new filter; always confirm by VIN if you have a different engine. Under normal driving, many owners service around 10,000 miles or 12 months, while severe duty (towing, frequent short trips, dusty conditions, or extended idling) benefits from roughly 5,000-mile or 6-month intervals. We install a Mopar or OEM-equivalent filter designed for the 3.6L Pentastar architecture and verify level on the dipstick post-fill. Bring your 2019 Ram 1500 to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for an OEM-spec oil change — schedule service.