2018 Dodge Charger Air Filter in Danvers, MA

Up-front pricing for 2018 Dodge Charger engine and cabin air filters is available online and at our Danvers service desk.

Final cost depends on whether you’re replacing the engine air filter, cabin air filter, or both, and the specific Mopar OEM part used. We post current offers on our service specials page and provide estimates before work begins. Visit us at 107 Andover St (Route 114), Danvers, MA 01923 for an itemized quote.

• Transparent estimates provided before service
• OEM-spec Mopar filters available for the 2018 Dodge Charger
• Check current discounts on our service specials

Follow the official interval listed in your 2018 Dodge Charger owner’s manual, with earlier inspections based on your driving conditions.

High pollen periods, construction zones, and salted winter roads on the North Shore can load the engine filter sooner. We recommend quick visual inspections during routine service, then replacement when restriction or debris is evident. Our technicians can show you the filter’s condition during your visit.

• Owner’s manual provides the factory interval
• Local dust, salt, and pollen can shorten service life
• Ask for a no-obligation inspection during your next schedule service

Use the maintenance interval in your 2018 Dodge Charger owner’s manual as the baseline and inspect sooner if HVAC airflow weakens or odors appear.

Spring pollen and fall leaf debris around Greater Boston can clog the cabin filter faster. If you notice foggy windows that clear slowly or reduced airflow, it’s time to check the cabin filter. We can assess it during your visit and replace it with an OEM-spec part if needed.

• Reference the factory cabin filter interval in the owner’s manual
• Replace sooner with weak airflow or musty odors
• Quick inspections available during scheduled appointments

The engine air filter sits in a sealed airbox in the engine bay, and the cabin air filter is positioned behind the glove box.

The 3.6L V6 draws intake air through the engine-bay airbox, where the filter traps debris before it reaches the throttle body. The cabin filter mounts within the HVAC housing, typically accessed by lowering or removing the glove box. Our team can confirm access points for your exact configuration.

• Engine filter: sealed airbox in the engine bay
• Cabin filter: HVAC housing behind the glove box
• Tool-free or basic-tool access in most cases

The engine air filter protects the 3.6L V6 intake from dust, while the cabin air filter cleans air for passengers through the HVAC system.

Your Charger’s engine filter helps maintain performance and fuel efficiency by preventing debris from entering the intake. The cabin filter helps reduce pollen, dust, and odors inside the vehicle. Replacing both on schedule keeps drivability and comfort in balance.

• Engine filter: combustion air quality and sensor protection
• Cabin filter: interior air quality and HVAC airflow
• Different locations, different service intervals

Common signs include reduced power or mpg for the engine filter, and weak HVAC airflow or musty odors for the cabin filter.

With the 3.6L V6, a restricted engine filter can also cause a rougher idle or audible intake strain. Inside the cabin, a dirty filter can make defogging slower and increase dust on surfaces. If you notice these symptoms, book a quick inspection.

• Lower fuel economy or throttle response
• Weak HVAC airflow and slower defogging
• Musty or dusty odors from the vents

Yes—engine filters are typically DIY-friendly, while the cabin filter may require glove box access and careful trim handling.

Many owners can change the engine filter with basic tools and the correct Mopar-spec part. Dealer service adds an intake housing check, a visual MAF sensor inspection, and proper fitment verification. If you prefer assistance, you can schedule service online.

• DIY possible with the right parts and tools
• Dealer adds intake/MAF checks and disposal
• Use OEM-spec filters to maintain performance

Yes—our Danvers service center installs Mopar OEM-spec filters for the 2018 Dodge Charger.

Using genuine Mopar or OEM-equivalent parts supports proper fit and filtration for the 3.6L V6 intake and the HVAC system. Our factory-certified, OEM-trained technicians perform the work to manufacturer standards. Ask about any current offers on our service specials page.

• Mopar OEM-spec engine and cabin filters
• Performed by factory-certified technicians
• Quality parts help preserve performance and comfort

During a 2018 Dodge Charger air filter service, our technicians perform a focused set of inspections and replacements designed to protect the 3.6L V6 intake and your cabins air quality. We begin with an engine air filter inspection, checking the airbox for debris and ensuring the seal and ducting are intact. If replacement is needed, we install an OEM-spec Mopar filter and verify proper seating. We also inspect the cabin air filter behind the glove box, replacing it when restricted or contaminated. An intake housing check and a visual MAF sensor review help prevent unmetered air or contamination issues. You can review any current discounts on our service specials. Ready to book? Schedule service online for a convenient appointment time.

The 2018 Dodge Charger with the 3.6L V6 (engine code 6VNAG3.6) uses an engine air filter sized for the Pentastar intake and a cabin air filter designed for the HVAC housing behind the glove box. Follow the OEM-recommended inspection and replacement intervals in your owners manual; heavy pollen or dusty road conditions may require earlier attention. We stock Mopar OEM-spec filters to maintain correct fitment and filtration efficiency. If your Charger shows signs of reduced power, rough idle, weak HVAC airflow, or musty odors, a filter assessment is prudent. Bring your 2018 Dodge Charger to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for OEM-spec filter service schedule service.

We proudly serve Danvers, Peabody, Beverly, Lynnfield, Andover, and Salem from our modern facility at 107 Andover St (Route 114), Danvers, MA 01923. Local driving conditionsincluding spring pollen, coastal humidity, winter road salt, and frequent construction debriscan load both engine and cabin filters faster than average. Our factory-certified, OEM-trained technicians provide efficient inspections and replacements using Mopar OEM-spec parts to keep your 2018 Dodge Charger running smoothly and your cabin air fresh. After service, we can set reminders aligned to your driving patterns. For directions, hours, or to reserve a time, schedule an appointment online and check our service specials for current offers.