2018 Chrysler 300 Oil Change in Danvers, MA

Yes — dealer oil changes include OEM-spec oil and a matching Mopar-quality filter, plus a documented multi-point inspection at Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers.

For a 2018 Chrysler 300, using the correct specification oil and filter helps maintain engine health and protect warranty coverage. Our Danvers, MA facility records each visit to your service history and performs checks many quick-lube shops skip. That’s valuable for long-term ownership and resale in the North Shore and Greater Boston areas.

• OEM-spec oil and Mopar-quality filter installed by factory-certified technicians
• Documented multi-point inspection and fluid top-offs included
• Easy online booking via schedule service and current service specials

Full synthetic resists heat breakdown better and flows faster at cold start than blends or conventional, providing stronger protection for modern engines.

Your 2018 Chrysler 300 benefits from premium base oils and additive packs that keep deposits low and wear in check, especially during New England winters and stop‑and‑go traffic. While synthetic blends outperform conventional, full synthetic maintains viscosity stability over a wider temperature range, supporting consistent lubrication.

• Improved cold-start pumpability helps reduce wear on short winter trips
• Better oxidation resistance supports longer service intervals when applicable
• Meets modern OEM performance standards designed for today’s engines

Missing required oil changes can lead to denied warranty coverage for related engine issues because you haven’t followed the factory maintenance schedule.

Keep dated service records showing the correct oil and filter were used at the prescribed intervals. Having work performed to OEM specifications at a certified facility in Danvers, MA helps protect you if warranty questions arise. We log services digitally and can provide documentation when needed.

• Follow the owner’s manual schedule and retain receipts
• Use OEM-spec oil and filters to match Chrysler requirements
• Schedule with our certified team: schedule appointment

Change the oil about every 10,000 miles or 12 months under normal driving, or closer to 4,000 miles in severe New England conditions.

The oil life monitor may call for service sooner based on your actual use in Danvers and the North Shore (short trips, cold starts, towing, or heavy traffic). Sticking to these intervals helps maintain performance and longevity for the 3.6L V6. If your driving is mostly short, cold trips, use the severe-service guideline.

• Normal: ~10,000 miles/12 months; Severe: ~4,000 miles
• Severe includes frequent short trips, extreme cold, or heavy stop‑and‑go
• Use our online scheduler to stay on cadence

Use full synthetic 5W‑20 engine oil that meets Chrysler’s MS‑6395 performance specification.

This viscosity supports proper cold-start flow and high‑temperature protection for the 2018 Chrysler 300’s V6 in New England’s climate. Oils that meet MS‑6395 ensure the additive chemistry and base stocks align with Chrysler’s design targets. We install OEM-spec oil and a Mopar-quality filter at our Danvers service center.

• Viscosity: 5W‑20 (full synthetic recommended)
• Meets Chrysler MS‑6395 performance spec
• Installed by factory-certified techs with a multi-point check

The 2018 Chrysler 300 with the 3.6L V6 holds about 6.0 quarts of engine oil with a filter change.

Filling to the correct capacity prevents aeration and ensures stable oil pressure. After service, our technicians verify the level on the dipstick and reset the oil life monitor. For accuracy, we also inspect for leaks and replace the drain-plug gasket as needed at our Danvers, MA facility.

• Approximate capacity: 6.0 quarts with filter
• Level verified warm and idling on level ground
• Oil life monitor reset and service documented

Plan for about 45–60 minutes for a dealership oil change, including installation, inspection, and paperwork.

Time can vary with shop volume and whether you request a tire rotation or additional checks. Our Danvers location streamlines approvals and uses factory-trained technicians to complete the service efficiently without cutting corners. Booking ahead helps you lock in a convenient time.

• Typical bay time: ~45–60 minutes
• Add-ons (rotations, filters) may extend the visit
• Reserve a slot via our schedule service tool

Expect an estimated $89–$139 for a full-synthetic oil change with OEM-spec oil and a Mopar-quality filter.

Pricing reflects quality materials and a multi-point inspection performed by factory-certified technicians in Danvers, MA. Exact totals vary with oil quantity, shop supply fees, and any requested add-on services. Check our current service specials for savings and book online for up-front confirmation.

• Includes OEM-spec oil and Mopar-quality filter
• Multi-point inspection and fluid top-offs included
• See offers: service specials

For the 2018 Chrysler 300, our process is structured and transparent to protect your engine and document proper care. After verifying the VIN and oil spec, we drain the old oil, replace the drain‑plug gasket as needed, and install a Mopar‑quality oil filter matched to the engine. We then fill with OEM‑spec full‑synthetic oil, start the engine, check for leaks, and confirm the level warm at idle. A multi‑point inspection follows, including belts/hoses, brakes (visual), battery health, and filters. We top off fluids, set tire pressures, and reset the oil life monitor. You’ll receive a detailed invoice so your maintenance record is easy to reference later. Ready to keep your service history current? Use our schedule service tool.

Drivers in Danvers, Peabody, Beverly, Lynnfield, Andover, and Salem rely on our OEM-focused process for consistent results. New England winters demand strong cold‑start pumpability; summers and city traffic add heat and oxidation stress. Our technicians account for these duty cycles and can advise whether your driving is “normal” or “severe” for interval planning. Located at 107 Andover St (Route 114), Danvers, MA 01923, our modern service center streamlines check‑in, approvals, and documentation. Use the online scheduler for a time that fits your day, and review current service specials before you arrive. For directions or assistance, visit our main site or start your schedule appointment now.

The 2018 Chrysler 300’s V6 is best supported by full synthetic 5W‑20 engine oil that meets Chrysler’s MS‑6395 performance specification. With an oil and filter change, capacity is about 6.0 quarts, which we verify on the dipstick after warm idle. Follow the oil life monitor and plan roughly every 10,000 miles or 12 months under normal conditions; in severe New England duty (frequent short trips, extended idling, towing, or extreme cold), target closer to 4,000 miles. We install a Mopar‑quality oil filter matched to the engine to maintain proper filtration and anti‑drainback performance. Bring your 2018 Chrysler 300 to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for an OEM-spec oil change — schedule service.