2017 RAM 1500 Oil Change in Danvers, MA

$79–$129 is the typical 2017 Ram 1500 oil change price range at Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers, with up-front, line-item estimates.

This range reflects OEM-spec oil, a Mopar-quality filter, and environmentally responsible oil disposal for the 3.6L V6. Pricing can vary by oil type and seasonal offers. You can review current service specials and book a time that fits your schedule. Our Danvers team services North Shore communities like Peabody, Beverly, Lynnfield, Andover, and Salem.

• Price includes OEM-spec oil and Mopar filter
• Multi-point inspection and fluid top-offs included
• Book online: schedule service

Most 2017 Ram 1500 oil changes take 45–60 minutes at our Danvers dealership, including inspection and paperwork.

The visit covers oil and filter replacement, a multi-point inspection, and fluid top-offs for your 3.6L V6. Plan a little extra time during peak hours or if additional services (like tire rotation) are requested. Save time by using our online schedule service tool and checking in early.

• Typical bay time: 45–60 minutes
• Includes multi-point inspection and top-offs
• Faster check-in with an online appointment

Change the 2017 Ram 1500’s oil about every 8,000 miles in normal driving, or around every 4,000 miles in severe New England conditions.

Cold starts, frequent short trips, towing, and stop-and-go traffic on Route 114 shorten oil life in the 3.6L V6. Follow the owner’s manual and your oil-life monitor, and keep records to protect warranty coverage. If your usage skews severe, use the shorter interval and OEM-spec oil.

• Normal: ~8,000-mile interval
• Severe duty (cold, towing, short trips): ~4,000 miles
• Track maintenance in your service records

The 2017 Ram 1500 3.6L V6 typically uses SAE 5W-20 oil that meets Chrysler MS-6395; full-synthetic oil meeting this spec is recommended for New England climates.

This viscosity supports quick cold-start flow and stable protection under load. We install OEM-spec oil and a Mopar-quality filter to match factory requirements. Check your owner’s manual for confirmation by engine and VIN.

• Viscosity: SAE 5W-20 (per typical OEM spec)
• Meets Chrysler MS-6395
• Full synthetic recommended for cold weather

The 2017 Ram 1500 3.6L V6 holds about 6.0 quarts of oil with a filter change.

Capacity can vary slightly by engine calibration and filter design; technicians verify level after filling and warm-up. We use precise metering and confirm with the dipstick and the driver information center where applicable. Always use oil that meets the OEM specification.

• Approximate capacity: 6.0 quarts with filter
• Measured fill and level check after warm-up
• Uses a Mopar-quality oil filter

Yes — dealer service uses OEM-spec oil and a Mopar-quality filter, includes a multi-point inspection, and helps document maintenance for warranty protection.

Quick-lube shops can be convenient, but they may not always stock the exact OEM-spec oil and filter for your 3.6L V6. Our Danvers team follows factory procedures and records service to your file. Review our service specials and book online.

• OEM-spec oil and Mopar-quality filter installed
• Multi-point inspection and fluid top-offs included
• Digital records support warranty compliance

Skipping required oil changes can lead to denial of engine lubrication-related warranty claims; keep dated receipts and follow the OEM schedule.

Warranty coverage generally requires maintenance per the owner’s manual using oil that meets the factory specification. Service records show compliance. For diagnosis and warranty work, a certified facility is typically required.

• Follow the owner’s manual schedule and oil spec
• Retain invoices with mileage and VIN
• Use certified technicians for warranty-related repairs

Full synthetic offers the best cold-start pumpability and high-temp stability; blends are mid-tier; conventional is the most basic option.

For a 3.6L V6 working through New England winters and towing, full synthetic that meets Chrysler MS-6395 helps maintain viscosity and reduce deposits. Synthetic blends can be a budget-friendly upgrade over conventional. Use the viscosity in your manual.

• Full synthetic: strongest protection across temperatures
• Blend: better than conventional at a lower cost
• Conventional: meets baseline spec when allowed

Your 2017 Ram 1500 benefits from a methodical, OEM-minded process designed for consistent protection and record-keeping. We start with a safety check, then drain the old oil to factory procedures and replace the drain seal as required. Next, we install a Mopar-quality oil filter and fill with OEM-spec oil at the correct viscosity for the 3.6L V6. A multi-point inspection reviews brakes, tires, battery, lights, and underbody components. We top off fluids, set tire pressures, reset the oil-life monitor, and road-test as needed. You’ll leave with a clear invoice and service record for warranty support and future resale value. Ready to book? Use our online tool to schedule service or browse current service specials.

For the 2017 Ram 1500 equipped with the 3.6L V6 (flex-fuel capable), the typical oil requirement is SAE 5W-20 meeting Chrysler’s MS-6395 specification, with a fill of about 6.0 quarts when replacing the filter. OEM-spec, full-synthetic oil meeting this standard provides strong cold-start flow during Massachusetts winters and durable film strength under load. A Mopar-quality oil filter is installed to match factory filtration performance and bypass calibration. Normal-service oil changes occur about every 8,000 miles; severe-duty intervals shorten to around 4,000 miles for cold starts, frequent short trips, towing, dust, or heavy traffic. Bring your 2017 Ram 1500 to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for an OEM-spec oil change — schedule service.

Serving Danvers and the North Shore — including Peabody, Beverly, Lynnfield, Andover, and Salem — we tailor oil service to real New England driving. Cold starts and road salt in winter demand fast-flowing oil and proper filter performance. Summer towing and Route 114 stop-and-go traffic stress viscosity retention and oxidation control. Our factory-trained team uses genuine Mopar and OEM parts and follows model-specific procedures for the 3.6L V6 to keep your truck running clean and quiet. You can review service specials, then schedule an appointment at 107 Andover St (Route 114), Danvers, MA 01923. Clear estimates, accurate documentation, and careful workmanship make each visit straightforward and efficient.