2017 Chrysler 300 Air Filter in Danvers, MA

It sits inside a rectangular air box in the engine bay, fed by the front intake duct.

This enclosure protects the 3.6L V6 intake on the 2017 Chrysler 300 and keeps debris from reaching the throttle body. Access is typically from the top; the cover uses clips or screws. Our Danvers, MA technicians inspect the housing seal and intake tract to ensure proper fit and airflow.

• Location: engine bay air box with intake snorkel
• Protects the Pentastar V6 (engine code 6VNAG3.6)
• Housing seal and MAF area checked during service

It’s typically located behind or beneath the glove box in the HVAC intake path.

The 2017 Chrysler 300 uses a cabin microfilter to trap pollen and fine dust before air reaches the vents. Access commonly requires lowering the glove box and removing a small access panel. Our team in Danvers protects trim clips and confirms the filter door seals properly.

• Behind/below glove box access panel
• Filters pollen, dust, and road particulates
• Seal and airflow verified after installation

The engine filter protects combustion air for the V6, while the cabin filter cleans the HVAC air you breathe.

In a 2017 Chrysler 300, the engine air filter sits in the air box to safeguard the intake and help maintain power and MPG. The cabin filter lives near the glove box and removes allergens and odors. Both are vital but serve different systems and maintenance cues.

• Engine: intake protection, performance, efficiency
• Cabin: HVAC air quality, odor control
• Distinct locations and service steps

Common signs include reduced power, lower fuel economy, rough idle, weak HVAC airflow, and musty odors.

On the 2017 Chrysler 300, a dirty engine filter restricts the 3.6L V6 intake, while a clogged cabin filter chokes the blower and traps moisture. In North Shore driving, road sand, salt, and spring pollen can load filters faster. Book an inspection if you notice any of these symptoms.

• Sluggish acceleration or hesitation
• Fan works but airflow is weak or noisy
• Persistent cabin musty or dusty smell

The engine filter is usually DIY-friendly; the cabin filter often requires glove box removal and careful reassembly.

Many owners can access the 2017 Chrysler 300 engine air box with basic tools, but the cabin filter’s trim panels and tight clearances trip up first-timers. Dealer service adds OEM-spec parts, intake/MAF checks, and proper sealing so airflow and filtration meet Chrysler standards.

• DIY engine filter possible with simple tools
• Cabin filter needs careful trim handling
• Book a schedule service for OEM-spec results

Yes—Genuine Mopar filters that meet Chrysler engineering specifications are used for the 2017 Chrysler 300.

OEM filtration helps maintain correct airflow, fit, and sealing on the Pentastar V6 and the HVAC system. Our Danvers, MA service team installs Mopar-engineered parts and verifies housing integrity for long-term reliability.

• Genuine Mopar engine and cabin filters
• Designed to match Chrysler 300 ducting and seals
• Quality fitment reduces intake leaks and bypass

Schedule online at the Herb Chambers Danvers Service Center and visit us at 107 Andover St (Route 114), Danvers, MA 01923.

Use our online portal to select a time and request engine and/or cabin air filter service for your 2017 Chrysler 300. You can also review current offers before booking. Our facility serves the North Shore and Greater Boston with convenient access from Peabody and Beverly.

• Book now: schedule service
• Check offers: service specials
• Easy access on Route 114 in Danvers

Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers at 107 Andover St (Route 114), Danvers, MA 01923 performs quick inspections.

Bring your 2017 Chrysler 300 for an engine and cabin filter check, plus intake and housing inspection. Our factory-trained team supports North Shore drivers from Lynnfield to Salem with efficient appointments you can book online.

• Convenient Route 114 location
• Engine and cabin filter visual checks
• Online schedule appointment

Our air filter service for the 2017 Chrysler 300 focuses on fit, seal, and airflow integrity. We begin with an engine air filter inspection, opening the air box and checking the ducting and clips. If replacement is needed, we install a Genuine Mopar filter and verify the cover gasket and fasteners. The cabin air filter is inspected next by accessing the glove box area, confirming the door seal and correct orientation before reassembly. We also perform a visual check of the intake tract and MAF area for debris or oil contamination. Finish by confirming HVAC airflow. Ready to book? Use our online portal to schedule service any time.

The 2017 Chrysler 300 with the 3.6L V6 (engine code 6VNAG3.6) uses a panel-style engine air filter housed in the air box and a cabin microfilter positioned near the glove box. Genuine Mopar filters are engineered to Chrysler specifications for sealing surfaces, pleat geometry, and airflow, helping maintain throttle response and HVAC clarity. Replace intervals vary by driving environment; New England road sand, salt, and heavy pollen can shorten service life, so inspect regularly and follow your owner’s manual guidance. After installation, we confirm proper housing closure and orientation to avoid bypass and noise. Bring your 2017 Chrysler 300 to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for OEM-spec filter service — schedule service.

Serving the North Shore and Greater Boston—including Peabody, Beverly, Lynnfield, Andover, and Salem—our Danvers location understands how local conditions affect filters on the 2017 Chrysler 300. Winter plowing leaves sand and salt that load the engine filter, while spring pollen and coastal humidity challenge the cabin filter. Stop-and-go commuting along Route 114 can also accelerate dust accumulation. We provide straightforward inspections, Mopar replacements, and seal checks to keep performance and air quality consistent. Visit us at 107 Andover St (Route 114), Danvers, MA 01923, review service specials, and schedule service online for a time that fits your day.