2016 Chrysler Town-And-Country Oil Change in Danvers, MA

At Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers, a 2016 Chrysler Town-And-Country oil change typically costs $89–$129 before tax and shop fees.

Pricing reflects OEM-spec oil and a Mopar-quality filter, plus a multi-point inspection and fluid top-offs. You can review current dealership offers on our service specials page and book a time that fits your schedule. Transparent, up-front estimates help you plan maintenance around your family calendar in Danvers, MA.

• Up-front, written estimates for your approval
• OEM-spec oil and filter included
• Check our service specials for savings

Plan for about 45–60 minutes for a dealership oil change on a 2016 Chrysler Town-And-Country.

This timing covers vehicle check-in, proper drain and fill, a new filter, oil life monitor reset, and a multi-point inspection. For the quickest visit, reserve a time with our online schedule service tool and arrive a few minutes early to confirm your work order.

• Typical bay time: 45–60 minutes
• Includes inspection and OLM reset
• Book ahead with the online scheduler

Under normal driving, change the oil about every 10,000 miles or 12 months, guided by the oil life monitor.

Severe New England conditions—short trips in cold weather, frequent idling, stop-and-go traffic, towing, or dusty roads—may require shorter intervals (often around 5,000 miles). Follow the dash oil life indicator and your owner’s manual for the final say, and keep records of each visit in case warranty verification is needed.

• Normal service: up to ~10,000 miles/12 months (OLM-based)
• Severe service: consider ~5,000-mile intervals
• Always follow the oil life monitor and owner’s manual

Use 5W-20 engine oil that meets Chrysler MS-6395; full synthetic is recommended for robust protection.

This viscosity supports proper pumpability at cold start and stable film strength when hot. Using oil that meets MS-6395 and pairing it with a Mopar-quality filter helps maintain performance and reliability. Our technicians will confirm the correct spec during your visit and note it in your service record.

• Viscosity: 5W-20 per manufacturer specification
• Meets Chrysler MS-6395 performance standard
• Full synthetic recommended for cold-start and heat resistance

The 2016 Chrysler Town-And-Country 3.6L V6 holds approximately 6.0 quarts (5.7 liters) with a filter change.

After refilling, technicians verify the dipstick level and run the engine briefly to confirm proper circulation and check for leaks. Using the correct amount prevents aeration and ensures the oil life monitor reflects accurate service timing. We’ll document capacity and viscosity on your repair order.

• Approximate capacity: 6.0 quarts with filter
• Level verified on dipstick after fill
• OLM reset included with service

Yes — dealer service includes OEM-spec oil and a Mopar-quality filter plus a documented multi-point inspection that many quick-lubes don’t provide.

Quick-lube shops can be convenient and may cost less for basic conventional oil, but your minivan benefits from parts and specs matched to Chrysler engineering. Dealer records help with warranty verification and resale. You can also check service specials to manage costs.

• OEM-spec oil/filter and correct torque specs
• Multi-point inspection and fluid top-offs
• Service records that support warranty and resale

Skipping scheduled oil changes can lead to denial of lubrication-related warranty claims if maintenance isn’t documented.

Follow the owner’s manual and oil life monitor, and keep receipts and repair orders. Warranty work typically requires diagnosis and repair by certified technicians using OEM-spec fluids and parts. Our advisors can review your maintenance history and help you plan upcoming services.

• Maintain records: invoices and mileage/date
• Use oil that meets Chrysler MS-6395
• Certified facility recommended for warranty work

Full synthetic outperforms conventional and blends in oxidation resistance, cold-flow, and deposit control for the 3.6L V6.

That means better protection during Massachusetts cold starts and high-heat highway drives. While blends improve on conventional, they don’t match the stability of full synthetic. Choose an oil that meets MS-6395 in the required 5W-20 viscosity for reliable performance.

• Full synthetic: strongest protection and cold-start flow
• Blend: moderate upgrade vs. conventional
• Conventional: basic protection if it meets MS-6395

Book online in minutes using the dealership’s schedule service tool.

Choose a time that fits your day, add concerns or notes for the advisor, and view any available service specials before you confirm. You can also request same-day availability or shuttle options during booking, subject to capacity.

• Secure your spot via the online scheduler
• Apply offers from our service specials
• Get reminders and records for maintenance history

For dependable performance, the 2016 Chrysler Town-And-Country is serviced with 5W-20 engine oil that meets Chrysler MS-6395. The 3.6L V6 requires approximately 6.0 quarts with a filter change. Full synthetic provides stronger deposit control and better cold-start pumpability than conventional or blends, which is helpful in North Shore winters. The oil life monitor (OLM) determines normal interval timing (up to about 10,000 miles/12 months), while severe service—frequent short trips, towing, dust, or extended idling—calls for shorter intervals around 5,000 miles. A Mopar-quality filter designed for this engine helps maintain correct filtration and flow. Bring your 2016 Chrysler Town-And-Country to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for an OEM-spec oil change — schedule service.

Our oil service is a clear, step-by-step process designed to protect your engine and document maintenance for your records. After verifying concerns and mileage, we drain the old oil, replace the filter with a Mopar-quality unit, and refill with the correct 5W-20 oil meeting Chrysler MS-6395. We reset the oil life monitor, check for leaks, and perform a multi-point inspection. Fluids are topped off, belts/hoses and brakes are visually reviewed, and tire pressures are adjusted. Following the manufacturer’s schedule and keeping invoices helps protect warranty coverage should lubrication-related issues arise. Want to plan around your day? Use our schedule service tool, and review current service specials before you arrive.

We serve drivers across Danvers, Peabody, Beverly, Lynnfield, Andover, and Salem with oil changes tailored to New England conditions. Cold starts demand quick-flowing oil, while summer traffic and family road trips add heat and load—both factors your oil must handle. If your routine includes short hops, stop-and-go commutes, towing, or dusty construction routes, consider shorter intervals than the OLM’s normal window. Our factory-trained team uses OEM-spec fluids and Mopar-quality filters, documents the visit, and can alert you to open recalls or related maintenance needs. Find us at 107 Andover St (Route 114), Danvers, MA 01923. To reserve your time now, schedule an appointment and check our latest service specials.