2016 Chrysler Town and Country Air Filter in Danvers, MA

The engine air filter sits inside a rectangular airbox on the driver-side front of the engine bay, just behind the headlamp.

This location feeds the 3.6L V6 a steady supply of clean air while keeping the filter accessible for routine checks. Pop the hood, identify the black airbox near the front corner, and release the clips to inspect the element. For proper sealing and fitment, we install Mopar filters at Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers—book a quick visit online.

• Driver-side front corner of engine bay, behind the headlamp
• Panel-style filter in a clipped airbox—no special tools needed
• Schedule a professional check via our service scheduler

The cabin air filter is located behind the glove box; lower the glove box to access the rectangular cartridge and slide it out.

This position lets the filter clean incoming HVAC air before it reaches passengers, capturing dust and seasonal pollen common in Massachusetts. You’ll typically remove the side stops to drop the glove box and then release the small access cover. If you prefer a hands-off visit in Danvers, we’ll install a Mopar-spec filter and verify the HVAC door operation.

• Behind the glove box with a small access door
• Captures dust, pollen, and road debris before the vents
• Ask about current service specials for filter replacements

The engine air filter protects the 3.6L V6 intake, while the cabin air filter cleans HVAC air for passengers behind the glove box.

The engine filter sits in the airbox to keep dirt out of the combustion path, preserving power and MPG. The cabin filter—separate from the engine—removes dust and odors from the air you breathe. Both are simple to access with the right steps, and we stock Mopar filters for OEM fit and seal at our Danvers service center.

• Engine filter: feeds the intake; lives in the airbox
• Cabin filter: scrubs HVAC air; lives behind the glove box
• Mopar OEM elements help ensure correct fit and performance

Common signs include reduced power, lower fuel economy, and rough idle for the engine—and weak airflow or musty odors for the cabin.

Dusty New England roads, winter sand, and spring pollen can load filters faster. If your 3.6L V6 feels sluggish or the A/C output drops, it’s time to check both filters. Our Danvers team can quickly inspect and replace with Mopar elements to restore airflow and protect the HVAC evaporator.

• Engine symptoms: sluggish acceleration, MPG drop, uneven idle
• Cabin symptoms: weak vent flow, persistent musty smell
• Schedule a check via our online scheduler

Yes—most owners can DIY the engine filter; the cabin filter sits behind the glove box and typically needs trim removal.

DIY engine filter swaps are straightforward if you reseat the airbox seal properly. The cabin filter involves lowering the glove box and handling an access panel carefully. Dealer service in Danvers adds OEM-spec parts, correct airbox sealing, intake checks, and responsible disposal—all completed to Chrysler standards.

• Engine filter: tool-light DIY; ensure a tight airbox seal
• Cabin filter: glove box removal and careful reassembly
• Dealer visit includes Mopar filter, housing check, and disposal

Yes—our service team installs Mopar OEM-spec filters that match Chrysler engineering requirements.

Using Mopar elements helps ensure correct media density, frame fit, and airbox sealing for the 3.6L V6. It also supports proper HVAC performance and reduces the chance of annoying whistling or bypass leaks. Visit our Danvers, MA location for an OEM-quality install and a quick inspection of intake ducting.

• Mopar-branded engine and cabin filters for proper fit
• Engineered to Chrysler airflow and filtration specs
• Professionally seated to prevent leaks and noise

Book online anytime at our service scheduler.

Select your 2016 Chrysler Town and Country, choose engine or cabin filter service, and pick a convenient time. You can also review our current service specials before confirming. We’re located at 107 Andover St (Route 114), Danvers, MA 01923, serving the North Shore and Greater Boston with OEM-quality care.

• Open the scheduler and enter vehicle details
• Choose “air filter” or “cabin air filter” service
• Confirm your appointment and arrive at our Route 114 facility

It uses a 3.6L V6 (engine code 6VNAF3.6) rated at 283 hp and 260 lb-ft, which requires a correctly sized Mopar panel filter.

The Pentastar V6 depends on a clean, well-sealed element to maintain smooth intake airflow and throttle response. Using the exact OEM-spec media helps safeguard performance and fuel economy whether you’re commuting in Danvers or loading up for a family trip. We’ll install the proper Mopar filter and check the airbox seal.

• 3.6L V6 with 283 hp/260 lb-ft needs stable airflow
• Mopar filter sizing and seal prevent unfiltered bypass
• Good practice: inspect after dusty or sandy winter road conditions

Our air filter service is designed to restore airflow and protect your 2016 Chrysler Town and Country’s systems using OEM-spec parts and careful installation. First, we inspect the engine air filter, remove debris from the airbox, and replace the element with a Mopar filter that fits the 3.6L V6 housing precisely. We then reseat the cover and verify clamps and ducts for secure, leak-free connections. Next, we check the cabin air filter by lowering the glove box, accessing the filter door, and installing a clean Mopar cartridge to improve HVAC airflow and reduce odors. A quick visual of the intake system and the applicable intake sensor connection (MAF/MAP as equipped) helps confirm everything is in good order. Old filters are responsibly disposed of. Ready to plan your visit? Use our schedule service tool and browse current service specials.

The 2016 Chrysler Town and Country with the 3.6L V6 uses a panel-style engine air filter housed in a driver-side airbox. The cabin air filter is a rectangular cartridge situated behind the glove box to scrub incoming air before it reaches passengers and the HVAC evaporator. Mopar OEM filters are engineered to Chrysler’s flow and filtration targets, with frames and seals that match the factory airbox geometry for reliable seating. Follow the maintenance guidance in your owner’s manual; New England’s seasonal pollen and winter road grit can justify more frequent inspections depending on your route and driving mix. Using the correct Mopar-specified media helps maintain throttle response, cabin airflow, and system longevity. Bring your 2016 Chrysler Town and Country to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for OEM-spec filter service — schedule service.

Serving the North Shore and Greater Boston—including Peabody, Beverly, Lynnfield, Andover, and Salem—our Danvers service team understands local driving and climate. Winter sand and salt, coastal humidity, and spring pollen all contribute to faster filter loading, which can sap performance and reduce HVAC output. We install Mopar engine and cabin filters to preserve factory fit and airflow, then verify airbox sealing and duct integrity to prevent bypass leaks and noise. You’ll find us at 107 Andover St (Route 114), Danvers, MA 01923, with convenient online scheduling and timely appointments. Plan your visit with our schedule service tool and review current service specials. Whether you’re commuting through Greater Boston or shuttling family across the North Shore, our team helps keep your 2016 Chrysler Town and Country breathing clean.