2013 Jeep Grand Cherokee Oil Change

Plan for about 45–60 minutes for a dealership oil change appointment.

This timeframe covers check-in, lift time, draining/refilling with the correct oil, installing an OEM-spec filter, and completing a multi-point inspection. At Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers, MA, you can book a time slot that fits your day using our online scheduler. Many drivers wait on-site while we work; others drop off and return after errands.

• Typical appointment window: 45–60 minutes
• Book online 24/7: schedule service
• Address: 107 Andover St (Route 114), Danvers, MA 01923

Change the oil about every 8,000 miles under normal driving, or about every 4,000 miles in severe New England conditions.

Cold starts, frequent short trips, towing, and heavy stop‑and‑go traffic shorten oil life. Many 2013 Jeep Grand-Cherokee models also use an Oil Life Monitor; if it prompts service sooner, follow the alert. For winter-heavy and mixed city/highway use around Danvers and the North Shore, staying on the conservative side protects long-term engine health.

• Normal service: ~8,000 miles (or Oil Life Monitor alert)
• Severe duty: ~4,000 miles (cold, short trips, towing)
• Book ahead: schedule service

Use engine oil that meets Chrysler’s MS-6395 specification; most V6 models use SAE 5W-30, the 5.7L V8 uses 5W-20, and SRT8 uses 0W-40 full synthetic.

Viscosity depends on engine and operating climate. MS‑6395 oils are engineered for proper detergent and anti-wear chemistry in Jeep gasoline engines. In cold North Shore winters, the correct viscosity ensures faster pump-up at start-up. If you’re unsure of your engine, we can look it up by VIN when you schedule.

• Spec: Chrysler MS-6395 (gasoline engines)
• 3.6L V6: SAE 5W-30; 5.7L V8: SAE 5W-20
• 6.4L SRT8: SAE 0W-40 full synthetic

Total capacity is roughly 6.0–7.0 quarts with filter, depending on engine.

The 3.6L V6 typically uses about 6.0 quarts, while the 5.7L V8 and 6.4L SRT8 are around 7.0 quarts. Using the correct fill protects variable valve timing components and ensures accurate Oil Life Monitor behavior. We fill to spec, confirm on the dipstick, and check for leaks before returning your vehicle.

• V6 (3.6L): ~6.0 quarts with filter
• V8 (5.7L) or 6.4L: ~7.0 quarts with filter
• Includes new OEM-spec oil filter

A dealer service includes OEM-spec Mopar oil/filter plus a multi-point inspection and recall/software checks many quick-lube shops skip.

Quick-lube locations can be convenient, but they may not stock the exact Chrysler MS‑6395 oil or a Mopar filter calibrated for your engine. Our Danvers team documents service to help preserve warranty compliance and resale value. You can also review current service specials before you book.

• OEM-spec oil and Mopar filter installed
• Multi-point inspection and fluid top-offs
• VIN-based recalls/software checks

Missing required oil services can lead to denial of engine-lubrication-related warranty claims; keep dated receipts and follow the factory schedule.

Automakers require proof that maintenance was performed on time and to spec. If an engine issue arises and records are incomplete, coverage can be affected. Warranty work generally requires a certified facility, and using the correct oil spec is part of compliance. We maintain digital records for your protection.

• Follow the owner’s manual/OLM prompts
• Use oil meeting Chrysler MS-6395 (or SRT spec)
• Keep receipts and service logs

Chrysler MS-6395-approved full synthetic offers superior cold-flow and oxidation stability versus conventional, especially in New England winters.

Conventional oil meets basic viscosity needs but breaks down faster under heat. Synthetic blends improve stability, while full synthetics maintain viscosity in sub-freezing starts and resist deposits over longer intervals. Your engine’s required spec and viscosity should guide your choice; we’ll confirm the correct oil by VIN when you book.

• Spec compliance (MS-6395 or SRT’s 0W-40 requirement)
• Better cold-start protection with full synthetic
• Cleaner operation over the service interval

Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers at 107 Andover St (Route 114), Danvers, MA 01923 performs OEM-spec oil changes.

Our Mopar Service Center serves the North Shore and Greater Boston, including Peabody, Beverly, Lynnfield, Andover, and Salem. Use our online tool to pick a time and review service specials before your visit. We install Mopar filters and MS‑6395 or SRT‑spec oils matched to your engine.

• Easy online booking: schedule service
• Local to Route 114 in Danvers
• Factory-trained technicians

Book 24/7 using our online scheduler at /service/index.htm and choose a confirmed appointment time.

Select your 2013 Jeep Grand-Cherokee, pick a date, and we’ll reserve a bay for your visit. You can also check current service specials before you finalize. If you prefer, stop by our Danvers location during business hours for in-person scheduling.

• Online booking: schedule service
• See real-time appointment availability
• Add notes about concerns or driving conditions

Your 2013 Jeep Grand-Cherokee oil change is performed to OEM procedures for consistency and engine protection. After verifying mileage and Oil Life Monitor status, we safely lift the vehicle, drain the engine oil, and install a new gasket or crush washer where applicable. A Mopar or OEM-spec oil filter is fitted to the correct torque. We then fill with the specified viscosity oil that meets Chrysler MS-6395 (or SRT 0W-40), reset the maintenance reminder, and road-test as needed. A multi-point inspection follows, with fluid top-offs, tire pressure adjustment, and visual checks of belts, hoses, and underbody components. You’ll receive a service report so you can plan future maintenance with confidence. Ready to lock in a time? Use our online tool to schedule service.

Drivers across the North Shore and Greater Boston—Peabody, Beverly, Lynnfield, Andover, and Salem—count on consistent, OEM-spec oil service to handle winter cold starts and summer traffic. Thin-film protection at start-up matters in New England, and the correct oil spec helps maintain variable valve timing performance and cleanliness over the interval. At our Danvers facility on Route 114, factory-trained technicians service the 2013 Jeep Grand-Cherokee with approved oils and Mopar filters, document findings, and note any developing issues. You can browse current service specials before booking. We’re easy to reach from I‑95 and Route 1; plan your visit and reserve a bay now by using our online schedule service tool for a confirmed appointment.

For the 2013 Jeep Grand-Cherokee, gasoline engines require oil meeting Chrysler MS-6395. Typical viscosities are SAE 5W-30 for the 3.6L V6, SAE 5W-20 for the 5.7L V8, and SAE 0W-40 full synthetic for the 6.4L SRT8. Capacity ranges from about 6.0 quarts (3.6L) to roughly 7.0 quarts (5.7L/6.4L) including the filter. A Mopar or OEM-equivalent filter should be used to ensure proper bypass and anti-drainback performance. Many owners follow about 8,000 miles for normal service and about 4,000 miles for severe duty (frequent short trips, towing, or cold-weather operation), or service when the Oil Life Monitor indicates. Bring your 2013 Jeep Grand-Cherokee to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for an OEM-spec oil change — schedule service.