2013 Dodge Durango Oil Change in Danvers, MA

Expect an up-front, written quote tailored to your 2013 Dodge Durango, with OEM-spec oil and filter included.

Pricing reflects the correct viscosity and a Mopar- or OEM-spec filter for the Durango’s 3.6L V6, plus environmental disposal. You’ll see your total before work begins, and you can check current service specials for added savings. Schedule online to lock a time and receive confirmation.

• Includes OEM-spec oil and filter, plus disposal
• Written estimate before service; no surprises
• See current offers on our service specials page

Most 2013 Dodge Durango oil changes are completed in about 45–60 minutes, including a multi-point inspection.

Time on site can vary with shop volume and whether additional services are requested. Booking a set time through our online system helps keep your visit efficient and predictable. You can wait in our lounge or opt for shuttle/ride-share arrangements if available at check-in.

• Typical bay time: ~45–60 minutes
• Multi-point inspection included during the visit
• Reserve a slot via our schedule service tool

A practical guideline is every 8,000 miles or 6 months, or about 4,000 miles under severe conditions.

Severe service includes frequent short trips, extended idling, towing, or extreme temperatures—common in New England winters and busy Boston-area traffic. Following the OEM schedule helps maintain performance and protects engine components. Use your oil-life monitor as a guide, but don’t exceed the time limit.

• Normal: ~8,000 miles/6 months (whichever comes first)
• Severe: ~4,000 miles recommended
• Book a slot via schedule service

Use SAE 5W-20 engine oil that meets Chrysler MS-6395; full synthetic or a synthetic blend that meets this spec is acceptable.

This viscosity supports quick cold-start flow and stable protection at operating temperature in the 3.6L V6. We stock oils that meet or exceed MS-6395 to match the Durango’s design requirements. If you tow or face wide temperature swings, full synthetic is a smart choice for added thermal stability.

• Viscosity: SAE 5W-20 (meets Chrysler MS-6395)
• Full synthetic recommended for broad temperature ranges
• OEM-spec filter installed with every change

The 2013 Dodge Durango 3.6L V6 typically requires about 6.0 quarts of oil with a filter change.

Capacity can vary slightly with filter design and residual oil, so technicians verify level after fill and engine run-up. Our team measures precisely, then rechecks after a brief idle to confirm the correct dipstick reading. You’ll leave with the level set to spec and your maintenance indicator reset.

• Approximate capacity: ~6.0 quarts (with filter)
• Level verified hot and after a short idle
• Maintenance light reset during service

Yes—dealer service uses oil and filters that meet Chrysler MS-6395 and includes a multi-point inspection documented to your VIN.

Independent quick-lube shops can be convenient, but they may not always stock OEM-spec parts for your Durango. Our technicians are trained on Mopar procedures and torque specs, and your service history is recorded for warranty support. Decide based on what you value: OEM compliance, documentation, and trained oversight.

• OEM-spec oil/filter installed to MS-6395
• VIN-linked records for future warranty support
• Technicians trained on Dodge 3.6L service steps

Skipping required oil changes can lead to denial of lubrication-related warranty claims if maintenance isn’t performed and documented.

Follow the manufacturer’s schedule and keep receipts or digital records to demonstrate proper care. Warranty work typically requires documentation and may need a certified facility for diagnosis and repair. We maintain service records tied to your VIN to help protect coverage.

• Adhere to OEM intervals and keep proof of service
• Certified diagnosis generally required for claims
• Service history stored to your vehicle’s VIN

Full synthetic provides the best high‑temperature stability and cold‑start flow, blends are mid‑tier, and conventional offers basic protection.

Your Durango requires oil that meets Chrysler MS-6395 in SAE 5W-20; many full synthetics and blends qualify. In New England’s cold winters and hot summers, full synthetic helps maintain viscosity control across temperatures. Choose based on your driving: towing, short trips, or long highway miles.

• Meets Chrysler MS-6395 in SAE 5W-20
• Full synthetic = widest protection range
• Blend/conventional options available if they meet spec

For a 2013 Dodge Durango, our oil change follows OEM steps to protect the 3.6L V6. After confirming the correct SAE 5W-20 MS-6395 oil and an OEM-spec filter, we drain the old oil, replace the filter, and fill to the proper capacity. We perform a multi-point inspection to review underbody components, belts, hoses, brakes, and visible leaks. Fluids are topped off, tire pressures set, and the maintenance indicator reset. You’ll receive a report with notes and recommendations, so you can plan future maintenance with confidence. To keep your visit efficient, use our online tool to choose a time and review available service specials.

Ready to book? Use our fast online portal to schedule service and get an up-front estimate before you arrive.

The 2013 Dodge Durango with the 3.6L V6 is engineered for SAE 5W-20 oil that meets Chrysler MS-6395. This viscosity supports quick pumpability during cold starts and stable film strength at temperature. Typical capacity is about 6.0 quarts with a filter change; technicians verify the dipstick after fill and a brief idle. Use an OEM-spec Mopar filter designed for the Pentastar V6 to maintain proper filtration and anti-drainback function. A practical change interval is ~8,000 miles/6 months in normal driving, trimmed to ~4,000 miles in severe conditions such as frequent short trips, heavy stop-and-go, or towing. Bring your 2013 Dodge Durango to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for an OEM-spec oil change — schedule service.

We support drivers across the North Shore and Greater Boston—Peabody, Beverly, Lynnfield, Andover, and Salem—with oil service tailored to local conditions. Cold winters demand oil that flows fast on start-up, while summer heat, city congestion, and periodic towing favor strong thermal stability. Our team selects oil that meets Chrysler MS-6395 in SAE 5W-20 and installs an OEM-spec filter, then documents the visit for your records. You can relax in our modern lounge while we complete a multi-point inspection and reset your maintenance light.

Find us at 107 Andover St (Route 114), Danvers, MA 01923. For convenient booking and current offers, check service specials and schedule an appointment. We’ll confirm your time and provide an up-front estimate before any work begins.