2013 Chrysler 200 Air Filter in Danvers, MA

The 2013 Chrysler 200 engine air filter sits under the hood inside a black plastic air box connected to the intake tube.

This sealed housing feeds the 2.4L inline-4 and is typically secured with clips or screws for quick access. Replacing the filter helps the 173-hp engine breathe properly and supports consistent throttle response. If you prefer professional service, our Danvers location on Route 114 can inspect and replace the filter to Mopar specifications.

• Engine: 2.4L inline-4 (173 hp at 6,000 rpm)
• Air box: under-hood, intake snorkel attached
• Location: 107 Andover St (Route 114), Danvers, MA 01923

The 2013 Chrysler 200 cabin air filter is typically located behind the glove box in the HVAC intake path.

This position filters outside air before it enters the vents, capturing dust and pollen for cleaner cabin air. Access usually involves lowering or removing the glove box and a small access panel. Our technicians can replace it quickly and check the blower intake for debris during the visit.

• Usual access: glove box lowered/removed
• Purpose: filters HVAC air for passengers
• Optional: book via schedule service

The engine air filter protects the 2.4L intake for combustion, while the cabin air filter cleans HVAC air for you and your passengers.

Engine filters sit under the hood and safeguard the throttle body and MAF area from dust, helping maintain power and fuel economy. Cabin filters live inside the dash and reduce pollen, dust, and odors for in-cabin comfort. Both matter—one for vehicle performance, one for air quality.

• Engine filter: in air box, feeds the intake tract
• Cabin filter: in HVAC path, behind glove box
• OEM brand used here: Mopar (Chrysler applications)

Typical signs include reduced power, lower fuel economy, rough idle, weak HVAC airflow, and musty odors.

For the 2.4L inline-4, a restricted engine filter can dull throttle response and raise fuel consumption. Inside the cabin, a dirty filter cuts airflow and can cause foggy windows or stale smells. If you notice these, book an inspection so we can confirm the cause and replace only whats needed.

• Engine symptoms: sluggish acceleration, uneven idle
• Cabin symptoms: weak vents, increased haze/odors
• Quick booking: schedule appointment

Yes—the engine filter is often DIY-friendly; the cabin filter typically sits behind the glove box and may require trim removal.

DIY owners can access the engine air box with basic tools, but be careful to seat the seal correctly. Cabin filters can be tighter to reach without breaking tabs. Dealer service includes an intake housing check and a visual MAF inspection to protect engine sensors.

• DIY: engine filter clips/screws; confirm gasket fit
• Cabin filter: confined space, delicate panels
• Dealer: OEM-spec filter, housing/MAF check, disposal

Yes—our team installs Mopar filters designed for Chrysler applications on the 2013 Chrysler 200.

OEM-spec media matches the airflow and filtration targets for the 2.4L inline-4 and the vehicles HVAC system. This helps maintain performance, fitment, and sealing. If you prefer, ask about genuine Mopar part options during write-up and well document the part numbers on your repair order.

• Brand: Mopar (Chrysler OEM)
• Fitment: proper seal in air box and cabin slot
• Book now: schedule service

Visit Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers at 107 Andover St (Route 114), Danvers, MA 01923 for cabin and engine air filter service.

We serve nearby North Shore communities including Peabody, Beverly, Lynnfield, Andover, and Salem. Our advisors can confirm access procedures behind the glove box and install a Mopar-spec filter. Check current offers before you arrive.

• Address: 107 Andover St (Route 114), Danvers, MA 01923
• Areas served: North Shore and Greater Boston
• Deals: see service specials

Schedule online at our Service Scheduler: /service/index.htm.

Pick a time that fits your day and well prep the correct Mopar filters for your 2013 Chrysler 200. You can also review current offers before you book. If you have questions, include them in the appointment notes and an advisor will follow up.

• Online booking: schedule appointment
• Offers: service specials
• Location: Danvers, MA (Route 114)

Your 2013 Chrysler 200 benefits from a methodical, OEM-spec process that protects both performance and in-cabin air quality. We start with an engine air filter inspection, verifying the condition of the media and the seal. If replacement is needed, we fit a Mopar-spec element and ensure the air box closes evenly with no pinched gasket. Next, we inspect the cabin air filter behind the glove box, checking for debris and proper airflow before installing a fresh filter if required. Throughout the visit, we examine the intake housing and perform a visual check of the MAF/throttle-body area for contamination. We dispose of used elements responsibly and note part details on your repair order. Ready to get it done? Use our online schedule service tool and choose a time that works for you.

The 2013 Chrysler 200 uses an engine air filter sized to support its 2.4L inline-4 output of 173 hp at 6,000 rpm and 166 lb-ft at 4,400 rpm. We install Mopar-spec filters engineered to balance airflow and filtration efficiency for this powertrain. The cabin air filter sits in the HVAC intake path to remove dust and pollen before air reaches the vents, improving comfort and reducing window fogging. If your daily routes include stop-and-go traffic, construction zones, or tree-lined streets, filters can load more quickly and benefit from periodic checks. Documented fit and sealing are crucial—minor gaps can bypass dust into the intake or cabin. Bring your 2013 Chrysler 200 to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for OEM-spec filter service — schedule service.

Located at 107 Andover St (Route 114) in Danvers, we support North Shore and Greater Boston drivers, including Peabody, Beverly, Lynnfield, Andover, and Salem. Local driving can expose your 2013 Chrysler 200 to seasonal pollen, road dust, and winter road treatment residue—each accelerates filter loading in the intake and HVAC system. Our team inspects both filters, verifies housing integrity, and installs Mopar-spec elements that fit and seal correctly. Before you arrive, review our current service specials and lock in a time using our schedule service tool. Well document parts used and return your old filters on request for transparency. For directions, set your GPS to 107 Andover St (Route 114), Danvers, MA 01923.