2010 Chrysler 300 Air Filter in Danvers, MA

The 2010 Chrysler 300 engine air filter sits inside the air intake box in the engine bay, typically on the passenger-side fender area.

This housing feeds the 3.5L V6 (engine code 6VNAG3.5) clean intake air before it reaches the throttle body. At Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers, MA, we access the box, inspect the seal and ducting, and check for debris common on New England roads. Proper seating prevents unfiltered air from bypassing the element.

• Passenger-side air box near the front corner of the bay
• Feeds the 3.5L V6 intake ahead of the MAF/throttle body
• We inspect the lid gasket and intake snorkel for leaks

The engine air filter protects the 3.5L V6 from dirt entering the intake, while the cabin air filter cleans air flowing through the HVAC into the passenger area.

Both filters improve longevity and comfort, but they serve different systems. In Danvers and the North Shore, sand, pollen, and road grit can clog either filter, affecting performance or interior air quality. Our Mopar-spec replacements match Chrysler fit and filtration.

• Engine filter: combustion health and MAF/throttle protection
• Cabin filter: HVAC airflow, odor, and dust mitigation
• Different locations, dimensions, and service steps

Key signs include reduced power and lower fuel economy for the engine filter, and weak HVAC airflow or musty odors for the cabin filter.

If your 2010 Chrysler 300 hesitates or idles roughly, the engine filter may be restricting the 3.5L V6 at higher RPMs. Interior dust, foggy windows, or noisy fans with little airflow point to a saturated cabin filter. Our Danvers team can inspect both quickly and confirm the cause.

• Engine: sluggish acceleration, rough idle, higher fuel use
• Cabin: diminished vent flow, persistent odors, more dust
• Visual check for dirt load and damaged filter media

Yesthe engine filter is usually DIY-friendly, while the cabin filter can require trim access; a dealer adds OEM-spec parts and intake/MAF checks.

Owners comfortable with basic tools can handle the engine filter. The cabin filter often sits behind interior panels, so careful removal helps prevent squeaks and fit issues. In Danvers, our factory-certified techs use Mopar filters and verify ducting, seals, and sensor condition.

• DIY possible for engine filter; careful fitment is critical
• Cabin filter access may involve glove box/trim removal
• Dealer visit includes housing seal and MAF visual inspection

Yes, we install Mopar OEM-spec engine and cabin air filters for the 2010 Chrysler 300.

Using genuine Mopar and OEM parts helps ensure proper filtration, airflow, and fitment for the 3.5L V6 and the HVAC system. This is especially important for New England driving where dust, salt, and pollen are common. Ask our Danvers service team for current part references.

• Mopar OEM-spec filters matched to Chrysler engineering
• Consistent fit in factory air box and HVAC tray
• Backed by our certified, OEM-trained technicians

Book online at our Danvers service center via the schedule service form.

Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers is located at 107 Andover St (Route 114), making it convenient for North Shore drivers. Use our online tool to pick a time and note engine or cabin filter concerns; check available service specials before you arrive.

• Schedule online: schedule service
• Easy access from Peabody, Beverly, Lynnfield, Andover, and Salem
• Clear estimates and OEM parts

Follow the 2010 Chrysler 300 owners manual interval and inspect more often if you drive in dust, pollen, or salted-road conditions.

New England climate and Route 114 traffic can load the engine filter sooner, especially on all-season roads with sand or leaf debris. Our Danvers team can inspect at each oil change and recommend timing based on actual condition rather than guesswork.

• Manual-based interval with condition-based inspections
• Accelerated checks for dusty, salty, or high-pollen routes
• Documentation provided on every visit

Use the owners manual guideline and replace sooner if airflow drops or odors appear from the vents.

Pollen seasons and coastal moisture on the North Shore can saturate the cabin filter faster. If your 2010 Chrysler 300 has weak HVAC performance or musty smells, schedule a quick check in Danvers and well confirm condition and fit a Mopar-spec filter if needed.

• Manual-referenced timing, adjusted for local conditions
• Watch for airflow reduction and interior odors
• Easy online booking for a same-day inspection

We provide a written, up-front estimate for engine and cabin air filter service before any work begins.

Pricing depends on whether youre replacing the engine filter, the cabin filter, or both, and uses Mopar OEM-spec parts. You can request an estimate online, then check our current service specials for potential savings.

• Transparent estimate for parts and labor
• Mopar-spec components for proper fit and performance
• Online scheduling: schedule service

Our air filter service focuses on both performance and cabin comfort for your 2010 Chrysler 300. First, we inspect the engine air filter element, housing lid, and intake snorkel for damage, debris, and proper sealing, then replace the filter with a Mopar OEM-spec part when needed. We perform a visual check of the mass airflow (MAF) sensor area and throttle inlet to spot dust trails that indicate bypass. Next, we assess the cabin air filter for dust load, moisture, and odors before installing a Mopar-spec replacement if required. Each service includes proper seating of the filter media, confirmation of airflow direction and tray fit, and documentation of findings. To keep things simple, you can view current service specials and schedule service online. For questions or to book by phone, call our Danvers team at (978) 774-4040.

Drivers across the North Shore and Greater Bostonincluding Peabody, Beverly, Lynnfield, Andover, and Salemrely on our Danvers service center for precise 2010 Chrysler 300 air filter care. Local conditions add stress: spring pollen, coastal humidity, autumn leaves, winter sand and road salt can load both engine and cabin filters faster. Our factory-certified, OEM-trained technicians evaluate real-world condition rather than guessing by mileage alone, then fit Mopar-spec components for consistent airflow and sealing. Use our Route 114 location for easy access and quick turnaround. Ready to plan your visit? Book a schedule service appointment, review service specials, or call (978) 774-4040 for directions and availability.

The 2010 Chrysler 300 with the 3.5L V6 (3518cc, V configuration, 250 hp) uses an engine air filter sized for adequate flow at higher RPM while trapping fine particulates before the throttle body. The cabin air filter supports HVAC efficiency and interior air quality. Mopar OEM-spec filters are recommended for correct fit within the factory air box and cabin tray. Follow the owners manual for service intervals and consider more frequent inspections if you commute on Route 114 or drive in dusty, salty, or high-pollen conditions common to the North Shore. Proper filtration supports performance, fuel economy, and comfort. Bring your 2010 Chrysler 300 to Herb Chambers Chrysler Dodge Jeep RAM FIAT of Danvers in Danvers for OEM-spec filter serviceschedule service.